CNC Turning Center
   
l210a l210a 01
   
   

 

Heavy Duty Rigid Design and Construction
♦  The major parts are manufactures from high quality Meehanite cast iron and are tempered to relieve stress.
♦  The ruggedly constructed base is scientifically rib reinforced for maximum stability during turning.
♦  Extra wide box ways on the X and Z axes way surfaces are hardened, precision ground and coated with
    Turcite-B for outstanding wear resistance.
♦  The 45 slant bed design features an extremely firm support for the turret and added chip removal efficiency.
   
   


 

STANDARD OPTIONAL
♦  Hydraulic 3-jaw chuck ♦  Heat exchanger ♦  Transformer
♦  Soft 3-jaw ♦  Working lamp ♦  Hydraulic collet
♦  Boring tool holder ♦  Hydraulic cylinder ♦  Oil mist filter
♦  Set of boring bar sleeve ♦  Auto lubrication system ♦  Parts catcher
♦  Clamp / Unclamp foot-switch ♦  Removable coolant tank ♦  Workpiece conveyor
♦  Operation status light ♦  Tool box with tools ♦  Bar feeder
♦  Hydraulic system ♦  Leveling bolts and pads ♦  Chip conveyor
♦  Coolant system ♦  Operation and programming ♦  Hard 3-jaw
♦  Full splash guard     manual ♦  Tool presetter
♦  Hydraulic Servo Turret-8    
     
     

 

 

TECHNICAL DATA:
   MODEL L210A L210B L210C L210D
  Swing over bed mm Ø 520
  Swing over cross slide mm Ø 250
  Distance between center mm 610
  Max turning diameter mm Ø 360
  Max turning length mm 530
  Spindle motor kW 11 / 15
  Spindle speed rpm 45 - 4500 35 - 4500 35 - 3500 30 - 3500
  Spindle nose   A2-6 A2-8
  Chuck diameter or collet   8" 10" 10" 12"
  Diameter hole through spindle mm Ø 77 Ø 88
  Bar capacity mm Ø 65 Ø 77
  Spindle bearing I.D. mm Ø 110 Ø 130
  Tailstock taper   MT4
  Tailstock quill diameter x travel mm Ø 80 x Ø 80
  Feed motor kW 2.0 / 2.0
  Travel mm 210 / 610
  Rapid speed m/min 20 / 20
  Cutting feed mm/min 0.016 ~ 5000
  Tool stations number on turret   10 / 12
  Turret index time sec. 0.13 / 0.11
  Tool size mm ¤25
  Boring tool diameter mm Ø 40
  Hydraulic pump motor kW 1.5
  Coolant pump motor kW 0.53
  Lubrication pump motor w -
  Floor space (LxWxH) km 2.7 x 1.6 x 1.8
  Machine weight kg 3700 3800 3900 4000
*All specifications and designs are subject to change without prior notice.